Define the priced material
A friction-reducer price is meaningful only when the product identity and invoice basis are clear. Request the named grade, product form, quoted mass or volume unit, active-polymer basis, packing and delivery scope. Emulsion, powder and high-salinity formulations should not enter the same price table as if their usable polymer content and handling requirements were identical.
Keep the quotation connected to the sample that passed the hydraulic evaluation. A lower offer for a different formulation is a new candidate, not a discount on the approved product. Begin with the supplier RFQ checklist when the quotation does not identify the tested material.
Calculate active-polymer cost
On a mass basis, delivered cost per kilogram of active polymer equals delivered cost per kilogram of product divided by the declared active-polymer mass fraction. If a quotation is per litre, convert using the density of that supplied formulation before comparing it with a mass quotation. Confirm whether the stated content means polymer or total nonvolatile material.
This calculation normalizes the commercial starting point; it does not establish equivalent field performance. Two candidates with equal active cost may require different dose or hydration conditions. Preserve the analytical method and uncertainty beside the activity figure, especially when comparing emulsion carrier systems with dry products.
Move from unit price to water cost
For an illustrative calculation only, a product costing USD 2.00 per kilogram at a demonstrated product dose of 0.30 kilogram per cubic metre contributes USD 0.60 per cubic metre of treated water. The numbers are arithmetic examples, not Xinqi prices or dose recommendations. Use the operation's measured consumption and current delivered quotation.
Add the measurable costs of preparation, dilution water, transfer, waste, packaging recovery and unusable stock. Do not assume a pressure-reduction percentage can be converted directly into fuel savings. Pump efficiency, rate, system pressure and the operating schedule determine whether an apparent hydraulic advantage becomes a real saving.
Compare under equal acceptance conditions
Cost rankings must use candidates tested in the same water and temperature window at the required response time. A low final loop pressure after several minutes may not satisfy a system that needs rapid response. Include the incumbent, a water blank and repeated critical points before using the dose result in a purchasing decision.
The flow-loop test method establishes the technical comparison. Record the complete trace, not just the best point, and identify water batches and preparation age. Exclude a candidate from the economic ranking if it has not met the required hydraulic and compatibility conditions.
Account for order size and stock exposure
Ask for sample, trial and repeat-order pricing separately. A bulk discount may be offset by extended storage, partial-container losses or an unsuitable unloading arrangement. Match estimated demand to an operating forecast and record which team owns the risk of unopened stock after a water-source or treatment-program change.
Separate firm charges from estimates: freight, inland haulage, insurance, unloading and any destination-dependent costs. Compare offers on the same delivery term and date. Do not treat an incomplete ex-works number as directly comparable with a fully scoped delivered offer.
Make the award conditional on evidence
Use a purchase comparison sheet containing product code, active basis, approved dose window, response timing, delivered product cost, handling cost and treated-water cost. Note limitations such as water chemistry, equipment path and the absence of a completed field trial. These qualifications belong beside the ranking rather than in an unattached laboratory email.
Request a technical and commercial response through the sample and quotation brief with water analysis, rate, trial volume, destination and required delivery window. Retain the accepted calculation with the order so a later change in activity, density or dose triggers a genuine cost review.

